Sew40-10 micro heat dryer unit

working principle:

Sew micro heat regeneration dryer adopts pressure swing adsorption high-temperature regeneration principle to dry compressed air. It is a product developed by absorbing the advantages of hot regeneration and no heat regeneration. It is an energy-saving and efficient dryer. The regenerated gas is used to purge and regenerate the adsorbent in the adsorption tower after the temperature of the micro heater rises, which can save the air consumption of regeneration and achieve good regeneration effect, The adsorption time is longer.

Product features:

Set up automatic charging and equalizing process steps to reduce the impact of air flow on adsorbent.

It is easy to change desiccant in flange filling port and discharge port.

The scientific design of flow rate and the selection of high-quality adsorbent ensure the stability of dew point of finished gas.

Special gas distributor ensures uniform distribution of air flow, makes compressed air fully contact with adsorbent, and prevents "dead angle" and "tunnel effect" of adsorption.

It adopts PLC program controller, LCD display, touch button, and can adjust the working regeneration time according to the working condition.

Drying and regeneration status display, automatic constant temperature control, energy saving.

Control the gas source from the dry air at the outlet of the adsorption tower to avoid oil and water pollution, control the valve and gas path, and prevent valve rust and gas path blockage.

High quality heating and control components ensure long-term and reliable operation of the equipment.

High quality pneumatic valve can be opened and closed quickly with high efficiency and durability.